Allen-Bradley 1738-ADNX Manual do Utilizador Página 73
- Página / 134
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Publication 1738-UM001A-EN-P - February 2005
Specifications A-3
ArmorPoint DeviceNet Adapters - 1738-ADN12, -ADN18, -ADN18P, and -ADNX
General Specifications (continued)
Relative Humidity IEC 60068-2-30 (Test Db, Un-packaged Non-operating Damp Heat):
5-95% non-condensing
Shock IEC60068-2-27 (Test Ea, Unpackaged Shock):
Operating 30 g
Non-operating 50 g
Vibration IEC60068-2-6 (Test Fc, Operating):
5 g @ 10-500 Hz
ESD Immunity IEC 61000-4-2:
6 kV contact discharges
8 kV air discharges
Radiated RF Immunity IEC 61000-4-3:
10V/m with 1 kHz sine-wave 80%AM from 30 MHz to 2000 MHz
10V/m with 200 Hz 50% Pulse 100%AM at 900 Mhz
10V/m with 200 Hz 50% Pulse 100%AM at 1890 Mhz
EFT/B Immunity IEC 61000-4-4:
±4 kV at 5 kHz on power ports
±3 kV at 5 kHz on signal ports
Surge Transient Immunity IEC 61000-4-5:
±1 kV line-line(DM) and ±2 kV line-earth(CM) on power ports
±2 kV line-earth(CM) on shielded ports
Conducted RF Immunity IEC 61000-4-6:
10Vrms with 1 kHz sine-wave 80%AM from 150 kHz to 80 MHz
Emissions CSPR 11:
Group 1, Class A
Enclosure Type Rating Meets IP65/66/67 (when marked)
Mounting Base Screw Torque #8 screw, 7.5 in. lbs. in Aluminum, 16 in. lbs. in Steel
Wiring Category
1
1 - on power ports
1 - on communications ports
Weight Imperial (Metric) 0.80 lb. (0.36 kg)
Certifications:
2
(when product is marked)
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada
CE
2
European Union 89/336/EEC EMC Directive, compliant with:
EN 61000-6-4; Industrial Emissions
EN 50082-2; Industrial Immunity
EN 61326; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
C-Tick Australian Radiocommunications Act,
compliant with: AS/NZS CISPR 11; Industrial Emissions
ODVA ODVA conformance tested to DeviceNet specifications
1. Use this Conductor Category information for planning conductor routing. Refer to Publication 1770-4.1, Industrial Automation
Wiring and Grounding Guidelines.
2. See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates, and other certification details.
- ArmorPoint I/O 1
- DeviceNet 1
- Adapters 1
- Important User Information 2
- Purpose of This Manual 3
- Who Should Use 3
- This Manual 3
- What the Manual Contains 4
- Related Terms 5
- Preface 4 6
- Related Products and 7
- Documentation 7
- Preface 6 8
- Table Of Contents 9
- ii 10
- Appendix D 11
- Default Data Maps 11
- iv 12
- Mount the Adapter and 13
- I/O Base 13
- Set the Node Address 14
- Wire the 15
- DeviceNet Adapters 15
- Chapter Summary and 16
- What’s Next 16
- Use the Adapter 18
- 3. Configure the Subnet I/O 19
- IMPORTANT 21
- Understand the DeviceNet 22
- Network and Subnet 22
- Data Collection 23
- Module Power 23
- Adapter Features 24
- Baudrates 25
- Auto Start Mode 25
- Auto Catalog Replace 26
- Backplane Autobaud 28
- Auto Address 29
- Physical List Acquire Status 29
- Cycling Node Status 30
- Poll Connection Produce Size 30
- Cycling I/O Mapping 31
- Automatic Device Replacement 31
- Physical Ordering 32
- Interscan Delay (ISD) 33
- Expected Packet Rate 33
- Communicate Through 34
- Image Table Mapping 36
- Communicate With 39
- I/O Modules 39
- Use Diagnostic Tables 40
- Use Auto Start Mode 43
- Why Use Auto Start Mode? 44
- Byte Boundaries 45
- Word Boundaries 45
- Double Word Boundaries 45
- Fixed Boundaries 45
- Install the I/O Module 46
- Use RSNetWorx 47
- Double click on 48
- Begin Auto Start Mode 49
- Use Custom Configuration 51
- Configuration Overview 53
- Set the Scanner’s Parameters 55
- DeviceNet Scanner’s Scanlist 61
- Set the Adapter’s Parameters 63
- Chapter Summary 66
- Troubleshoot the ArmorPoint 67
- DeviceNet Adapter 67
- Guidelines for Using 69
- Your Adapter 69
- Specifications 71
- A-2 Specifications 72
- Specifications A-3 73
- A-4 Specifications 74
- Quick Start For the 1738-ADNX 75
- Subnet Out 82
- MACID Parameter 83
- Review of the 1738-ADNX 83
- Rules and the 83
- Review of Auto Start Mode 85
- Browse the Subnet 89
- Inputs and Outputs 93
- Navigate Between Networks 98
- Switch Between Networks 100
- 1. Slot Number 102
- 2. Scanlist tab 102
- 1738-ADNX 105
- Appendix 109
- Message size: 1 Byte 112
- Message size: 6 Bytes 117
- Message size: 4 bytes 119
- Message size: 2 Bytes 119
- Message size: 8 Bytes 121
- 1738-232ASC ASCII Module 123
- 1738-485ASC ASCII Module 123
- D-14 Default Data Maps 124
- 2 126
- 3 127
- 4 128
- 5 129
- 6 130
- How Are We Doing? 131
- BUSINESS REPLY MAIL 132
- Rockwell Automation 134
Manuais e produtos relacionados com não Allen-Bradley 1738-ADNX
não Allen-Bradley 1734-ADN Especificações
(28 páginas)
(28 páginas)
Defender Sharky TVmate manuály
Uživatelské manuály a uživatelské příručky pro Konzole Defender Sharky TVmate.
Poskytujeme 2 manuály pdf Defender Sharky TVmate ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comentários a estes Manuais