Allen-Bradley 2-D Manual do Utilizador Página 107

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 172
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 106
Programming
5-38
Output Configuration Group (continued)
[
An
a
lo
g
O
u
t
S
e
l
]
Parameter # 25 Factory Default “Frequency”
[
An
a
lo
g
O
u
t
S
e
l
]
Parameter Type Read & Write
This parameter selects the value to which the 0-10V DC
aa a 2-5ir ria.
Units Text Setting ‘‘Frequency”
0 to [Maximum Freq]
Th
i
s p
arame
t
er
s
e
l
e
cts th
e
v
a
lu
e
to
w
h
i
ch th
e
0-10
V DC
analog output at TB2-5 is proportional to.
‘‘Current”
0 to 200% of Rated Drive Output Current)
aa a 2-5ir ria.
‘‘Bus Volts”
0 to Maximum Bus Voltage– 410V/230V Drives
815V/460V Drives
‘‘Power”
0 to 200% of Drive Rated OutputPower
“Output Volts” 0 to Drive Rated Voltage
[
Abov
e
F
re
q V
a
l
]
Parameter # 77 Factory Default 0 Hz
[
Abov
e
F
re
q V
a
l
]
Parameter Type Read & Write Minimum 0 Hz
This parameter sets the level at which Output 1 or Output 2
will transition when [Output 1 Config] or [Output 2
Config] are set to ‘‘Above Freq”. This provides an
indication that the drive is operating above the
programmed frequency value.
Units 1 Hz Maximum 400 Hz
NOTE: This parameter can not be programmed
while the drive is running.
[
Abov
e
Cu
rr
V
a
l
]
Parameter # 142 Factory Default 0 % of Drive Rated Current
[
Abov
e
Cu
rr
V
a
l
]
Parameter Type Read & Write Minimum 0 % of Drive Rated Current
This parameter sets the level at which Output 1 or Output 2
will transition when [Output 1 Config] or [Output 2
Config] are set to ‘‘Above Curr”. This provides an
indication that the drive output current exceeds the
programmed value.
Units 1% Maximum 150% of Drive Rated Current
The drive rated output current is based on three phase input ratings. See page 5-13 for Single Phase Input Rating instructions.
Vista de página 106
1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 171 172

Comentários a estes Manuais

Sem comentários